Our Process
Restoring & Recolouring Joinery
Restoring is what we love doing, so much so that we want to share our process with you.
We use the best equipment in the industry to ensure you get the highest quality of workmanship. Our work is gauranteed leaving you 100% satisfied.
STAGE 1. PREPARATION
CLEANING
Joinery is cleaned with correct solvents and soapy water to make sure the substrate is free fom dust and contaminants, and further wiped down to ensure paint adhesion. A final wipe down given with a tack rag to remove any dust on the substrate.
SURFACE PROTECTION
Rubbers, glass, walls, ceilings are all well masked up and protected from over spray. A portable booth would be set up if any interior joinery is being restored to ensure your personal belongings are protected.
STAGE 2. FINISHING
k
SANDING
The substrate would be sanded for adhesion purposes, We only use the recommended grit sand paper, this depends on the condiiton of the joinery. Any repairs such as corrision, putting or dents would be rectified at this stage.
ETCHING
An etch is also applied to all bare aluminium to improve adhesion.
TOP COAT
Two coats of colour would be applied in spray form. Metallics and pearls would require a further two clear coats.
Our process is proven, and our customers love the results! Call us now to get your quote!
Need a comercial quote? Call AWC now 0800 029 269 and speak to one of our friendly experts.
alternatively email us: info@awcoatings.co.nz